Memoria DDR3 4Gb 1333Mhz PC3-10600 -Kingston (KVR13N9S8/4)

$7,540.00

Agotado

SKU: 11467 Categorías: ,

Descripción

KVR13N9S8/4

DESCRIPTION
This document describes ValueRAM’s 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.

The electrical and mechanical specifications are as follows:
– JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
– VDDQ = 1.5V (1.425V ~ 1.575V)
– 667MHz fCK for 1333Mb/sec/pin
– 8 independent internal bank
– Programmable CAS Latency: 9, 8, 7, 6
– Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
– Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
– 8-bit pre-fetch
– Burst Length: 8 (Interleave without any limit, sequential with starting address ?000? only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
– Bi-directional Differential Data Strobe
– Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
– On Die Termination using ODT pin
– Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C - Asynchronous Reset - PCB: Height 0.740? (18.75mm), single sided componen

Compartir este producto...